INTERFACES
USB2DIO
USB2-Digital-IO Interface
- 17 digital I/Os, programmable as input or output
- high data rates at USB2 High Speed (480Mbit/s)
- standard parallel I/O interface connector
- comes with
- USB2DIO.DLL (dynamic link library) for easy appliance
- Windows98, WindowsXP, Windows2000 USB2 Digital I/O Interface driver
- Application examples which demonstrate the use of the DLL
CONVERTER
USB2DMX
USB2DMX - DMX512 Interface
USB to DMX converter - USB interface for DMX512 at USB2 High Speed (480Mbit/s)
Interface to control show effect laser, ligtht control and scanners.
Features supported by the device:
- USB2 to DMX converter
USB2 High Speed (480Mbit/s) - Parrallel to DMX (LPT2DMX)
- Serial to DMX (COM2DMX)
- 2x DMX inputs (input 1, input 2)
- 2x DMX outputs (output 1, output 2)
- PORT1 (input 1 and output 1) are optocoupled (isolated) against PORT2 and the USB line
- PORT2 (input 2 and output 2) are optocoupled (isolated) against PORT1 and the USB line
- powered by the USB line or external power supply
| Version A | #pins | XLR pin description | ||
| JACK 1 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 1 output) | |||
| Pin 3: DMX+ (port 1 output) | ||||
| Pin 4: DMX- (port 1 input) | ||||
| Pin 5: DMX+ (port 1 nput) | ||||
| JACK 2 | 3 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 2 output) | |||
| Pin 3: DMX+ (port 2 output) | ||||
| JACK 3 | 3 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 2 input) | |||
| Pin 3: DMX+ (port 2 input) | ||||
| Version B | #pins | XLR pin description | ||
| JACK 1 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 1 output) | |||
| Pin 3: DMX+ (port 1 output) | ||||
| Pin 4: DMX- (port 1 input) | ||||
| Pin 5: DMX+ (port 1 nput) | ||||
| JACK 2 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 2 output) | |||
| Pin 3: DMX+ (port 2 output) | ||||
| Pin 4: DMX- (port 2 input) | ||||
| Pin 5: DMX+ (port 2 nput) | ||||
| Version C | #pins | XLR pin description | ||
| JACK 1 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 1 output) | |||
| Pin 3: DMX+ (port 1 output) | ||||
| Pin 4: free | ||||
| Pin 5: free | ||||
| JACK 2 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 1 input) | |||
| Pin 3: DMX+ (port 1 input) | ||||
| Pin 4: free | ||||
| Pin 5: free | ||||
| JACK 3 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 2 output) | |||
| Pin 3: DMX+ (port 2 output) | ||||
| Pin 4: free | ||||
| Pin 5: free | ||||
| JACK 4 | 5 pins | Pin 1: Ground | ||
| (female) | Pin 2: DMX- (port 2 input) | |||
| Pin 3: DMX+ (port 2 input) | ||||
| Pin 4: free | ||||
| Pin 5: free | ||||
PO-LOG
Power-Logger
coming soon
- 0-60 Ampere
- voltage and current storing (logger)
- high resolution
RC-SPORT
RC-Power Supply:
BECPAK
Power supply for RC-models / DC-DC converter / step down converter / buck converter
BEC stands for "Battery Eliminator Circuit" and is used in RC-models (Remote Controlled Models), e.g. RC-Cars, RC-Airplanes, RC-Ships, to eliminate the addiontional battery or accumulator for the RC-receiver and RC-servos.
In traditional BEC systems the power supply with a voltage of 5 Volt is
supplied by a linear regulator (passiv design), which converts the power
to dump the voltage from the main battery (assume 12V) to 5V by up to 2
Ampere current into pure heat.
This results in a efficiency of 42% by 2 Amperes (5V*2A / 12V*2A).
When higher input voltages are used the efficiency drops even deeper (21%
by 24V/2A).
Here the power comes from an active DC/DC switching device, which results
in much better efficiency (far less heat radiation).
- get high efficient power supply from accu
- 8-38 Volt input
- 5 Volt output (for receiver and servos)
- 2 Ampere continuos (3A peak)
- high efficiency 90%
- 8g weight (with cable)
- target applications (e.g.):
remote controlled model airplane, model helicopter, model ship