Xilinx CPLD:
XC9572-TB
Xilinx CPLD XC9572XL TinyBoard
- all pins are available on headers
- JTAG header for progamming
- onboard 2,5V and 3.3 V power supply
- IO reference voltage selection
- socket for crystal oscillator
XC9572 CPLD features:
- 5 ns pin-to-pin logic delays
- System frequency up to 178 MHz
- 72 macrocells with 1,600 usable gates
- Optimized for high-performance 3.3V systems
- Low power operation
- 5V tolerant I/O pins accept 5V, 3.3V, and 2.5V signals
- 3.3V or 2.5V output capability
Advanced 0.35 micron feature size CMOS Fast FLASH™ technology - Advanced system features
- In-system programmable
- Superior pin-locking and routability with Fast CONNECT™ II switch matrix
- Extra wide 54-input Function Blocks
- Up to 90 product-terms per macrocell with individual product-term allocation
- Local clock inversion with three global and one product-term clocks
- Individual output enable per output pin
- Input hysteresis on all user and boundary-scan pin inputs
- Bus-hold circuitry on all user pin inputs
- Full IEEE Standard 1149.1 boundary-scan (JTAG) - Excellent quality and reliability
- Endurance exceeding 10,000 program/erase cycles
- 20 year data retention
- ESD protection exceeding 2,000V - Fast concurrent programming
- Slew rate control on individual outputs
- Pin-compatible with 5V-core XC9572 device
- small dimensions 38mm x 76mm (mini module)
For configuration see Xilinx Configuration-HOWTO.
Xilinx FPGA:
XC3S200-TB
Spartan-3 XC3S200 TinyBoard
Spartan-3 XC3S200 Development Board with XC3S200-4PQG208C and Flatform Flash (Configuration Flash), Spartan-3 Board
Suitable for high speed design, very short trace lengths!
Top side:
- Xilinx FPGA XC3S200PQ208, XC3S200-4PQG208C
- JTAG header, mode pin header, config header
- crystal sockel
- reset push button, done led
- 3.5 to 5.5 Volt input connector
Bottom side:
- 3.3 Volt regulator for configuration flash and external use
- 2.5 Volt regulator for auxiliary
- 1.2 Volt regulator for core voltage
- a couple of bypass capacitators
- platform flash / configuration flash XCF02S
- all pins are available on headers (2.54mm-/0.1" pitch)
- all pins can be used, max. 144 User I/Os, max. 62 differential pairs, 8 GCLKs, 22 VREFs
- available with and without soldered 2.54mm pin headers
- different crystal oscillators possible
For configuration see Xilinx Configuration-HOWTO.
- DDR-DIMM Board supports up to 2 GB DDR SDRAM
XC3S400-TB
Spartan-3 XC3S400 TinyBoard
Spartan-3 XC3S400 Development Board with XC3S400-4PQG208C and Flatform Flash (Configuration Flash), Spartan-3 Board
Suitable for high speed design, very short trace lengths!
Top side:
- Xilinx FPGA XC3S400PQ208, XC3S400-4PQG208C
- JTAG header, mode pin header, config header
- crystal sockel
- reset push button, done led
- 3.5 to 5.5 Volt input connector
Bottom side:
- 3.3 Volt regulator for configuration flash and external use
- 2.5 Volt regulator for auxiliary
- 1.2 Volt regulator for core voltage
- a couple of bypass capacitators
- platform flash / configuration flash XCF02S
- all pins are available on headers (2.54mm-/0.1" pitch)
- all pins can be used, max. 144 User I/Os, max. 62 differential pairs, 8 GCLKs, 22 VREFs
- available with and without soldered 2.54mm pin headers
- different crystal oscillators possible
For configuration see Xilinx Configuration-HOWTO.
- DDR-DIMM Board supports up to 2 GB DDR SDRAM
XC3S200-FT-TB
Spartan-3 XC3S200 TinyBoard
Spartan-3 XC3S200 Development Board with XC3S200-4FTG256C and Flatform Flash (Configuration Flash), Spartan-3 Board
Suitable for high speed design, very short trace lengths!
Top side:
- Xilinx FPGA XC3S200, XC3S200-4FTG256C
- JTAG header, mode pin header, config header
- crystal sockel, DIP and SMD
- reset push button
- done led signals ready state (end of configuration mode)
- 3.5 to 5.5 Volt input connector
- 2.5 Volt regulator for auxiliary
- 1.2 Volt regulator for core voltage
- platform flash / configuration flash XCF02S
Bottom side:
- 3.3 Volt regulator for configuration flash and external use
- a couple of bypass capacitators
- all pins are available on headers (1.27mm-/0.05" pitch)
- all pins can be used, max. 173 user I/Os, max. 76 differential pairs, 8 GCLKs, 24 VREFs
- available with and without soldered 1.27mm pin headers
- different crystal oscillators possible
For configuration see Xilinx Configuration-HOWTO.
- DDR-DIMM Board supports up to 2 GB DDR SDRAM
XC3S400-FT-TB
Spartan-3 XC3S400 TinyBoard
Spartan-3 XC3S400 Development Board with XC3S400-4FTG256C and Flatform Flash (Configuration Flash), Spartan-3 Board
Suitable for high speed design, very short trace lengths!
Top side:
- Xilinx FPGA XC3S400, XC3S400-4FTG256C
- JTAG header, mode pin header, config header
- crystal sockel, DIP and SMD
- reset push button
- done led signals ready state (end of configuration mode)
- 3.5 to 5.5 Volt input connector
- 2.5 Volt regulator for auxiliary
- 1.2 Volt regulator for core voltage
- platform flash / configuration flash XCF02S
Bottom side:
- 3.3 Volt regulator for configuration flash and external use
- a couple of bypass capacitators
- all pins are available on headers (1.27mm-/0.05" pitch)
- all pins can be used, max. 173 user I/Os, max. 76 differential pairs, 8 GCLKs, 24 VREFs
- available with and without soldered 1.27mm pin headers
- different crystal oscillators possible
For configuration see Xilinx Configuration-HOWTO.
- DDR-DIMM Board supports up to 2 GB DDR SDRAM
XC3S1000-FT-TB
Spartan-3 XC3S1000 TinyBoard
Spartan-3 XC3S1000 Development Board with XC3S1000-4FTG256C and Flatform Flash (Configuration Flash), Spartan-3 Board
Suitable for high speed design, very short trace lengths!
Top side:
- Xilinx FPGA XC3S1000, XC3S1000-4FTG256C
- JTAG header, mode pin header, config header
- crystal sockel, DIP and SMD
- reset push button
- done led signals ready state (end of configuration mode)
- 3.5 to 5.5 Volt input connector
- 2.5 Volt regulator for auxiliary
- 1.2 Volt regulator for core voltage
- platform flash / configuration flash XCF04S
Bottom side:
- 3.3 Volt regulator for configuration flash and external use
- a couple of bypass capacitators
- all pins are available on headers (1.27mm-/0.05" pitch)
- all pins can be used, max. 173 user I/Os, max. 76 differential pairs, 8 GCLKs, 24 VREFs
- available with and without soldered 1.27mm pin headers
- different crystal oscillators possible
For configuration see Xilinx Configuration-HOWTO.
- DDR-DIMM Board supports up to 2 GB DDR SDRAM
XI-JTAG
Xilinx JTAG (programmer)
- used for programming / configuration of Xilinx CPLDs and FPGAs
- voltage supply from 2.0 V to 5.5 V
i.e. works down to 2.0 V and is therefore best suited for auxiliary supply of Xilinx FPGAs (2.5V aux) - supported as Parrallel Cable III by Xilinx iMPACT (Xilinx ISE)